Tsarin Hawan Mota na Hydraulic (ACS): Mafita Mafita ga Gina Gine-gine Masu Hawan Sama da Manyan Gine-gine

Idan ana maganar gina manyan gine-gine, hasumiyoyin gadoji, tashoshin samar da wutar lantarki na nukiliya, ko manyan gine-ginen masana'antu, inganci, aminci, da daidaito ba za a iya yin sulhu a kansu ba.Tsarin Hawan Mota na Hydraulic ɗinmu (ACS)yana sake fasalta ƙa'idodin gini ta hanyar kawar da dogaro da kayan ɗagawa na waje, yana ba da damar hawa hawa mai amfani da kansa, wanda ke rage lokutan aiki da rage farashin aiki.

Dalilin da yasa ACS ta yi fice: Manyan Fa'idodi

Hawan MuTsarin aikiTsarinan tsara shi ne don magance manyan matsalolin da ke tattare da ginin tsayi mai tsayi, yana ba da ƙima mara misaltuwa:

Hawa Mai Isasshe: Ana amfani da tsarin haɗakar jacking na hydraulic,tsarin hawa kai tsayeYana ba da damar tsarin aikin da layin jagora su "hawa" juna - babu cranes, babu ƙarin ɗagawa, kawai aiki mai santsi, mai zaman kansa.

Tsaro Mara Takurawa: Yana bin ƙa'idodin tsaro na duniya, ba tare da wata haɗarin karkata ko rashin kwanciyar hankali ba yayin hawa dutse.

Isar da Aiki cikin Sauri: Yana hawa a ~300mm/min, yana hanzarta ci gaba zuwa kwanaki 5 a kowane bene (matsakaici). Firam ɗin yana haɗuwa sau ɗaya kuma yana hawa zuwa sama, yana guje wa sake wargazawa/sake shigarwa.

Daidaito & Inganci: Yana rage kurakuran tsari ta hanyar gyara karkacewar layi-layi, yana samar da saman siminti mai fuska mai kyau wanda ba ya buƙatar kammalawa bayan kammalawa.

Tanadin Sarari da Farashi: Tsarin da aka tsara yana rage cunkoso a wurin; abubuwan da za a iya sake amfani da su (sassan anga, layukan jagora) suna rage sharar kayan aiki da kuma tsadar lokaci mai tsawo.

Samfurijerin: LG-100 da LG-120 

Muna bayar da samfura biyu masu inganci don dacewa da buƙatun ayyuka daban-daban - dagamai girma- gine-gine masu tsayi zuwa manyan gine-gine. Dukansu an gina su da kayan aiki masu inganci kuma ana yin gwaji mai tsauri don tabbatar da dorewa.

LG-100 LG-120

Mahimman Kayayyaki & Tsarin: An Gina don Aminci

Hawa Formworkya haɗa ƙananan tsarin aiki guda huɗu masu inganci, kowannensu an ƙera shi don yin aiki cikin jituwa mai kyau—tabbatar da aiki mai dorewa, sauƙin gyarawa, da tsawon rai na sabis.

1. Tsarin Aiki: Mai Sauƙi, Mai Ƙarfi, & Mai Yawa

Tsarin aikin tsari shine "fuskar"Tsarin hawa kai, an tsara shi don ingantaccen tsayi mai tsayi da kuma kammala siminti mai kyau:

• Babban Kayan Aiki: Filastar katako mai sauƙi amma mai ɗorewa (kauri 15mm/18mm), ya dace da rage nauyin firam ba tare da rage ƙarfi ba.

• Siffofin Zane: Haɗakar kayayyaki ta zamani tana ba da damar keɓancewa ga bango madaidaiciya, ginshiƙai, ko saman lanƙwasa. Gilashin katako (ma'aunin H20) suna aiki azaman haƙarƙari a tsaye, waɗanda aka haɗa su da walers na ƙarfe ta hanyar maƙallan flange don samun tallafi mai ɗorewa.

• Aiki: Faifan yana ba da kyakkyawan shaƙar ruwa da kuma iska mai shiga, yana hana lahani a saman siminti. Suna tallafawa har zuwa juyawa sau 35, wanda hakan ke ƙara yawan farashi.

2. Tsarin Anga: "Kashi" na Hawan Lafiya

Tsarin anga yana tabbatar datsarin hawa ta atomatikga tsarin, yana jure wa lodi a tsaye, matsin lamba a kwance, da ƙarfin lanƙwasawa. Ya haɗa da abubuwan da za a iya sake amfani da su don dorewa:

• Sinadaran:Angafaranti (D26.5)/D20), ƙarfi mai ƙarfisandar ɗaure(D26.5)/D20),Taurin kaiƙusoshi (M42)/M36), da kuma mazugi masu hawa (M42/26.5 ko M36/20).

• Manyan Fa'idodi: Zaɓuɓɓukan haɗa abubuwa guda biyu (Nau'in A don manyan kaya, Nau'in B don manyan kaya) sun dace da buƙatun aikin. Ana shafa mazubin hawa da wakilin fitarwa don sauƙin cirewa da sake amfani da su.

• Tsaro: Ana kashe ƙusoshin da ke ɗauke da kaya da kuma gano lahani (ƙarfin RC25-30) don tabbatar da cewa suna iya jure matsin lamba mai tsanani a kan ginin.

3. Tsarin Hydraulic: Ƙarfafa Hawa Mai Santsi, Daidaitacce

Tsarin hydraulic shine "injin" naaikin hawa ta atomatik, yana ba da ƙarfi mai ɗorewa don hawa babu matsala:

• Sassan Jiki: Tashar famfon ruwa ta Hydraulic (motar 1.5KW, AC380V), silinda masu aiki biyu, na'urorin commutators na sama/ƙasa, da bututun mai matsin lamba mai yawa (haɗin M14×1.5).

• Aiki: Yawan kwararar famfo na lita 2/min (kowace naúra) yana ba da damar hawan ~300mm/min. Masu amfani da na'urori masu auna sigina suna sarrafa alkiblar ƙarfin (firam ɗin ɗagawa ko layin jagora), wanda ke ba da damar hawan juna.

• Tsaro: Matsi yana iyakance ga ≤16MPa yayin aiki; na'urar wasan bidiyo ta musamman tare da ma'aunin matsin lamba tana tabbatar da sa ido a ainihin lokaci da gyara kurakurai.

4. Tsarin Maƙala: Taimako Mai Tsayi & Aiki Mai Tsayi

Tsarin bracket yana ba da kwanciyar hankali na tsari da dandamalin aiki masu matakai da yawa, yana kawar da buƙatar yin sifofi na ɗan lokaci:

• Babban Abubuwan: Tripods masu ɗauke da kaya (tare da maƙallan diagonal na diamita 140mm),saitin dawowa(Matsakaicin daidaitawa 600–700mm),hawalayukan dogo (ƙarfe H150 × 150 Q235),na'urar da aka haɗa a bango, manyan masu walersda dandamalin aiki (sama, babba,matsakaici, an dakatar da shi).

• Mahimman Sifofi: Maƙallin ɗaukar kayaisan haɗa ta hanyar ƙarfe H15 don samar da firam ɗin haɗin kai; saitin dawowa yana ba da damarsaikin formwork don ja da baya don ɗaurewa da tsaftacewa da ƙarfafa ƙarfe.

• Dandalin: Kowace dandamali ba ta zamewa, an gwada ta da kaya, kuma an sanya mata kayan kariya—tana tabbatar da tsaron ma'aikata yayin da take samar da sarari don zubar da siminti, gyaran kayan aiki, da kuma adana kayan aiki.

Sauƙin Hawan Aiki: Ajiye Lokaci & Aiki

Hawa formworkyana bin tsari mai sauƙi, mai maimaitawa wanda ke rage sarkakiyar da ke cikin wurin. Ƙungiya ɗaya za ta iya kammala hawa cikin sa'o'i, ba kwanaki ba:

1. Shiri Bayan Zuba Siminti: Bayan zuba siminti, cire kayan aikin sannan a ja shi ta amfani da na'urar motsa baya.
2. Shigar da Anga: Sanya ƙusoshin da ke ɗauke da kaya, tallafi da aka haɗa, da kuma mazugi masu hawa a cikinan tanadaramuka (wanda hawan da ya gabata ya bari).
3.  HawaƊaga Layin Dogo: Daidaita na'urorin hawa don ɗaga layin jagora zuwa sabon wurin anga; kulle shi a wurin da fil na aminci.
4. Hawan Firam: Sake saita na'urorin haɗi don ɗaga dukkan firam ɗin tare da layin jagora; tabbatar da daidaitawa kuma kulle firam ɗin.
5. Tsarin Ƙarfafawa da Tsarin Aiki: Ɗaure rebar, tsaftace tsarin aiki, shafa wakilin sakin kaya, sannan a sake sanya tsarin aiki a wurin da za a yi amfani da shi don zuba siminti na gaba.

Inganci & Tsaro: Fiye da Ka'idojin Masana'antu

Muna ba da fifiko ga aminci da dorewa a kowane bangare, tare da tabbatar da cewatsarin hawa tsarin hawaya cika ko ya wuce ƙa'idodin gini na duniya:

• Gwajin Kayan Aiki: Duk sassan ƙarfe (raga mai jagora, tripods, bolts) an yi su ne da ƙarfe mai nauyin Q235 ko 10.9, tare da juriyar tsatsa da gwajin juriyar tasiri.

• Ka'idojin Tsaro: Ana ba da izinin hawa dutse ne kawai lokacin da ƙarfin siminti ya kai ≥10MPa; an haramta shi a cikin iska mai matsayi 8+, tsawa, ko ƙarancin gani.

Haɗin gwiwa da Yancheng Lianggong: Mai Kaya da ACS ɗinka Mai Aminci

Zaɓaaikin hawan kai kaiyana nufin haɗin gwiwa da kamfanin da ke samar da kayayyaki fiye da kawai—muna bayar da tallafi daga ƙarshe zuwa ƙarshe ga ayyukan duniya:

Magani na Musamman: Mai Tailortsarin hawa ta atomatikga buƙatun musamman na aikinku (tsawo, kaya, tsari) tare da ƙungiyar injiniya ta cikin gida.

Isarwa ta Duniya: Jigilar kaya cikin sauri zuwa ƙasashe sama da 50, tare da tallafin kayan aiki na musamman don gujewa jinkiri.

Sabis na Bayan-Sayarwa:TTallafin fasaha, gyaran wurin aiki, da kuma maye gurbin kayan aiki don ci gaba da aikin ku.

A shirye don ɗaga ginin babban bene tare datsarin hawa tsarin hawaTuntuɓe mu a yau don neman shawarwari na fasaha kyauta, ƙiyasin da aka keɓance, ko gwajin samfuran kama-da-wane!

Bayanin hulda

Kamfanin: Yancheng Lianggong Formwork Co., Ltd.

Yanar Gizo:https://www.lianggongformwork.com    https://www.fwklianggong.com    https://lianggongform.com

Imel:tallace-tallace01@lianggongform.com

Lambar Waya: +86-18201051212

Adireshi: Lamba ta 8 Titin Shanghai, Yankin Ci Gaban Tattalin Arziki na Jianhu, Birnin Yancheng, Lardin Jiangsu, China