Tsarin Tsarin Itace na Lianggong H20mafita ce mai sauƙin amfani, mai sauƙi, kuma mai sauƙin amfani, wadda ta ƙunshi bangarorin katako na katako, katako na H20, walers na ƙarfe, maƙallan flange, da ƙugiya masu ɗagawa. Ana ɗaure katako na katako da katako da sukurori masu danna kai; walers na ƙarfe da katako suna da alaƙa da maƙallan flange. Yana da sauƙin haɗawa/wargazawa, kammala siminti mai santsi, da kuma amfani mai yawa ga bango, ginshiƙai, ginshiƙai, da madatsun ruwa.
1. Shiri Kafin Shigarwa
1.1 Kayan Aikin Tarawa
Shirya kayan aikin da ake buƙata kamar haka:
● Kayan aikin wutar lantarki: Injin haƙa hannu na lantarki, na'urar huda rami, na'urar planer ta lantarki, na'urar yanke wutar lantarki, na'urar yanke lanƙwasa, na'urar yanke igiya mai cin gashin carbide
● Kayan aikin aunawa: Mataki, ma'aunin tef, murabba'i mai kusurwa, madaidaiciya, bututun plumb
● Kayan aikin ɗaurewa: Screwdriver, spanner, manne gun, brad nailer
● Kayan aikin taimako: Goga mai fenti, trowel mai nuna alama, fensir, mai alama
1.2 Kayan Aiki Masu Taimako
Sukurun da ke taɓa kai, ƙusoshin ƙarfe, wayoyi na ƙarfe, manne mai silicone, putty na polyester, fenti mai rufe gefuna, wakilin sakin kaya.
1.3 Dandalin Taro
Gina dandamali mai tauri a tsayin mm 200–400 ta amfani da ƙarfe mai siffar I ko kuma tashar tashoshi. Tabbatar cewa dandamalin yana da faɗi, tsayayye, kuma madaidaici don tallafawa haɗa kayan aiki daidai.
2. Tsarin Haɗa Formwork
2.1 Tsarin da Matsayin Walers na Karfe
● Shirya walers na ƙarfe a kan dandamalin haɗuwa bisa ga girman ƙira.
● Yi alama a kan layukan sanyawa a kan ƙarfe walers kuma duba diagonal don tabbatar da murabba'in murabba'i mai kusurwa huɗu (diagonals dole ne su yi daidai).
2.2 Shigar da Bishiyoyin Katako na H20
● Sanya katako ɗaya a kowane ƙarshen walers ɗin ƙarfe; yi alama a layuka kuma tabbatar da daidaiton diagonal.
● A ɗaure sandunan ƙarfe da maƙallan flange.
● Miƙa siraran layin daidaitawa tsakanin sandunan ƙarshen guda biyu a matsayin bayanai.
● Sanya katakon katako na tsakiya a layi ɗaya da bayanan kuma a gyara kowannensu da maƙallan flange (daidaitaccen maƙallin stagger don matsin lamba iri ɗaya).
● Don wuraren ɗagawa:
Zaɓi katako masu haɗin yatsu na yanar gizo ≥1.5 m daga ramukan ƙugiya.
Manne katakon da farantin ƙarfe mai dacewa da ƙugiya mai ɗagawa, sannan a ɗaure shi da kyau.
● Don tsarin taɓawa kai tsaye na bayan gida: Gyara goyon bayan alwatika a matsakaicin tazara mai girman mm 400, tabbatar da cewa ba su fito daga bayan flange na katako ba.
2.3 Shigar da Panel na Plywood
● Shirya dukkan bangarorin katako kuma a tabbatar da girmansu.
● Haƙa ramukan gwaji a kusurwoyin panel kuma a sanya su na ɗan lokaci da ƙusoshin ƙarfe (shigar da su ba su da zurfi).
● Haƙa ramukan gwaji masu cikakken ƙarfi; a mayar da ƙarshen gaba da 2–3 mm.
● A ɗaure bangarori a kan katako da sukuran da ke taɓa kansu; a cire ƙusoshin da ke kan kusurwa.
● Ga bangarori da ke kusa: A shafa manne mai silicone a wuraren haɗin gwiwa sannan a matse sosai don tabbatar da cewa ruwa ba ya shiga.
● Bayan an gama shigarwa: Tsaftace saman, a cika kan sukurori da sinadarin polyester, sannan a yi santsi.
● Sanya katakon ƙarshe (4×8 cm) mai gogewa da gefuna na katako; a ɗaure shi da ƙusoshin ƙarfe na 5×80 mm.
● Itacen da aka yi wa ado a wuraren da aka ɗaga ƙugiya.
● Rufe allunan da fim ɗin filastik don kariya ta ɗan lokaci.
2.4 Hakowa don Sandunan Taye / Anga
● Yi alama a matsayin ramuka a kowane tsari ta amfani da matakin; sarrafa juriyar matsayi a cikin ± 2 mm.
● Yi haƙa a tsaye da injin haƙa da hannu da kuma naushi mai kyau don guje wa ramukan da suka karkace.
● A yi wa ramukan fenti sau biyu domin hana shan ruwa da kumburin gefen.
● Yi wa kowanne fanni lakabi da lambar zane domin guje wa ɓata wuri.
2.5 Ɗaga Tsarin Aiki da Aka Haɗa
● Yi amfani da igiyoyi biyu na ƙarfe waɗanda aka haɗa da ƙugiya na crane da wuraren ɗaga tsari.
● Ɗagawa a hankali; daidaita tsarin kafin a koma wurin shigarwa.
● Sauka a hankali, a ɗaure na ɗan lokaci, sannan a saki kayan ɗagawa.
3. Shigarwa da Daidaitawa a Wurin
● Tsaftace saman allon da goga mai matsakaicin tauri da kuma maganin tsaftacewa; cire duk ƙura da tarkace.
● A shafa wani siririn Layer na musamman na maganin sakin formwork (a guji sharar mai ko gauraye). A sake shafawa bayan ruwan sama.
● Duba ko akwai rikici tsakanin wuraren ƙarfafawa da wuraren ɗaure sanda/anga; daidaita ƙarfafawa kamar yadda ake buƙata.
● Sanya sandunan walda zuwa ƙarfafawa don sarrafa tazara tsakanin tsari da murfin siminti.
● Ɗagawa da sanya tsarin aiki; daidaita tsaye da plumb bob ko kayan aikin bincike.
● Sanya hannayen riga da ɗaure sanduna; ƙara matse goro. Sake duba daidaiton don dacewa da ƙa'idodin zubarwa (hannayen hannu za su faɗaɗa ~ 20 mm bayan aikin formwork).
4. Cire Tsarin Aiki
● Sassautawa: Sassauta sandunan ɗaurewa da zare 1-2 lokacin da ƙarfin siminti ya kai 6 MPa.
● Cire gaba ɗaya: Rufe aikin tsari idan ƙarfin siminti ya kai 10 MPa.
● Jerin abubuwa: Cire goro mai ɗaurewa → cire sandunan ɗaurewa → Cire bel ɗin tsakiya → baya ko ɗaga aikin tsari.
● Ga tsarin da aka makala: Cire ƙusoshin da aka ɗora da farko.
● KAR A yi amfani da sandunan ƙarfe na baya kawai a kan sandunan ƙarfe na baya.
5. Aiki, Gyara & Gargaɗi
5.1 Ajiya
● A adana a wurare masu iska, busassu, kuma masu inuwa; a kare su daga ruwan sama da hasken rana kai tsaye.
● Tara lafiya (matsakaicin fakiti 3).
● Cire madaurin ƙarfe na marufi don ajiya na dogon lokaci (sama da makonni 2) a cikin yanayi mai zafi/danshi don hana shiga gefen.
5.2 Yankanwa da Sarrafawa
● A yanka itacen da aka yi da itacen don samun sakamako mafi kyau; a yanka shi da wukake masu cincirindon carbide a ≥4000 r/min.
● A ɗan yi yashi a gefuna; a kiyaye fim ɗin saman.
● Rufe duk gefunan da aka yanke/ aka haƙa sau biyu da fenti mai tushen acrylic don dorewa.
6.3 Haɗin Fane
● A bar tazara mai girman 0.5–1 mm a kan haɗin panel don dacewa da faɗaɗa danshi.
● Yi amfani da tef ɗin soso ko silicone a takaitattun lokutan don sauyawar haɗin gwiwa.
5.4 Dokokin Haɗawa
● A yi haƙa ramukan gwaji kafin a fara haƙa su; a ajiye sukurori ≥20 mm daga gefuna da kuma ≥25 mm daga kusurwoyi.
● A shafa resin epoxy ko silicone kafin a tura sukurori; a bar sukurori 3–4 mm ba a shiga ba.
● Don kammalawa mai inganci: Kan sukurori masu recess 2 mm sannan a cika da putty.
● A guji amfani da farce na yau da kullun don amfani da su a tsaye ko a gefen da ke da matsin lamba mai yawa.
Girgizar Siminti 5.5
Hana kawunan masu girgiza su taɓa bangarorin aikin don guje wa lalacewar saman.
5.6 Tsaftacewa & Kariya
● Tsaftace allunan nan da nan bayan cire su; yi amfani da ruwa ko maganin sakin da ya dace.
● Yi amfani da buroshi don ragowar siminti; a guji yin amfani da shebur na ƙarfe.
● Kare daga fallasa hasken UV na dogon lokaci don hana lalacewar fim.
Me Yasa Za Mu Yi Aiki Da Mu?
Masana'antu na Ƙwararru:Aikin Lianggongbabban masana'anta ne mai layukan samarwa na zamani da kuma sama da shekaru 10 na gwaninta a tsarin aiki.
Magani na Musamman: Muna bayar da zane-zane na musamman dangane da zane-zanen aikinku da buƙatunku.
Sabis na Duniya: Isar da kaya cikin sauri, tallafin fasaha, da sabis bayan tallace-tallace sun shafi ƙasashe sama da 50 a duk duniya.
Shin kuna shirye don haɓaka ingancin ginin ku ta amfani da Tsarin Tsarin Gine-gine na Itace? Tuntuɓe mu a yau don samun farashi kyauta da cikakkun takardu na fasaha!
Bayanin hulda
Kamfanin: Yancheng Lianggong Formwork Co., Ltd.
Yanar Gizo:https://www.lianggongformwork.com https://www.fwklianggong.com https://lianggongform.com
Imel:tallace-tallace01@lianggongform.com
Lambar Waya: +86-18201051212
Adireshi: Lamba ta 8 Titin Shanghai, Yankin Ci Gaban Tattalin Arziki na Jianhu, Birnin Yancheng, Lardin Jiangsu, China
Lokacin Saƙo: Afrilu-21-2026